To prepare your aluminum boat for painting, you must first strip the old paint off of it and sand it completely. You should then totally clean the hull with soap and water to remove any particles and dust that have remained from the sanding process. The boat should be left to sit...continue

Large fiberglass repair kits are ideal to strengthen, repair or rebuild fiberglass damage above or below the waterline - kit comes equipped with polyester resin, fiberglass cloth, mixing tray, spread stick and instruction. In cases of minor damage to the gelcoat, use a Match n' Patch...continue

Washing the boat down with plain fresh water on a frequent basic is one step towards a boat needing to be waxed or washed. A good rinse is often sufficient to the eliminate the surface or water-line marks and grime that appears over time on the sidings and deck...continue

Marine tools can are often stored in an attaché style tough case for ease in storage, accessibility, and an attempt at keeping all tools water tight. In addition, some cases are able to float if dropped overboard. With an immense selection of tools on offer, with a small boat tool kit devised...continue

Products to assist in restoring a fiberglass gelcoat include a Oxidation remover to tackle general grime, stains and contaminants, a polish to restore a brilliant gloss finish, a pure wax can offer a durable and tough protection for all surfaces, and a dedicated metal polish... continue